Ampac Sea Pro™ Plus Marine Based Watermaker
200 Gallons per Day (GPD)

with Fresh Water Auto Flush

The Ampac Seawater Desalinization Sea-Pro™ Plus 200 GPD (Gallons Per Day) / 750 LPD (Liters Per Day)  Marine Based Watermaker System is a minimum power watermaker engineered for the boating industry, this is a horizontal one-piece frame configuration with internal High Pressure Booster Pump for ease of use in compact locations.  The super quiet SeaPro Watermaker features automatic operation and is easy to use with a Start and Stop control. It serves as an efficient fresh water supply from the sea, ideal for small power boats and sail boats All components within the frame are readily accessible for easy maintenance. This unit is designed to fit in tight places.

System Design:

Stage 1: Five micron Sediment pre-filter that reduces sediment, sand, silt, and rust particles that may be in your water supply. 

Stage 2: A heavy duty Five Micron lead and chemical reducing carbon block filter (LVOC).  This specially formulated block is capable of reducing lead as well as harmful Volatile Organic Chemicals.  These water contaminants comes from a variety of sources including localized use of herbicides and pesticides, gasoline or oil spill. 

Stage 3: Improved FILMTEC™ seawater reverse osmosis elements offer the highest productivity while maintaining excellent salt rejection.  FILMTEC SW membrane elements have the highest flow rates available to meet the water demands of both sea-based and land-based desalinators. FILMTEC SW elements operate at lower pressure to reduce cost, and operating expenses.

Improved FILMTEC seawater membrane combined with automated, precision element fabrication result in the most consistent product performance available.

Stage 4: Extruded Activated Carbon Post-Filter consist of virgin activated carbon powder, a thermoplastic binder, and specialty adsorbents such as zeolites oxidizing filtration media. The filters are manufactured as continuous lengths of rod, tube, slab, flexible flat sheet, or as other complex shapes using a proprietary solid-state extrusion process. The resulting products are highly porous and extremely uniform, providing high performance adsorption and particulate reduction at low flow resistance when fabricated into finished filter elements.Extruded activated carbon filters meet exacting performance requirements and/or claims, and specific models are registered as meeting the requirements of NSF/ANSI for VOCs and THMs reduction, particulate, cyst, turbidity, lead reduction, chlorine taste and odor reduction, and other requirements relating to purity and safety of their materials of construction.

Stage 5: pH Alkaline Neutralizer Post-Filter, Desalination Sea Water usually has very low pH making this water very acidic, the Alkaline Neutralizer Post-Filter will adjust the pH level to 7.0 Neutral Water as per World Health Organization for Drinking Water Standards.

Stage 6: Ultraviolet disinfection is a means of killing or rendering harmless microorganisms in a dedicated environment. These microorganisms can range from bacteria and viruses to algae and protozoa. Ultra Violet disinfection is used to disinfect and sterilize Permeate Product Water after the Desalination Process.  A major advantage of UV treatment is that it is capable of disinfecting water faster than chlorine without cumbersome retention tanks and harmful chemicals. UV treatment systems are also extremely cost efficient!

Seawater typically contains from 32,000 – 45,000 ppm of total dissolved solids (TDS). The World Health Organization has established a maximum TDS level of less than 500 ppm for drinking water standards. Reverse Osmosis water treatment technology is capable of making seawater drinkable by reducing the total dissolved solids by 99% or more. Ampac USA Sea Water Desalination Watermakers are specifically designed for those applications.

Desalination of Seawater and Treatment of Brackish Water were among the first practical applications of reverse osmosis. RO technology is particularly cost-effective, requiring lower capital costs than alternate treatment methods such as evaporation and distillation.   In addition, Reverse Osmosis is far less energy intense which lowers operating cost.

AMPAC USA Sea Water Desalination Watermakers are effective at lower pressure than older types, and also produce higher permeate water to feed water ratio. This all contributes to lower cost-per-gallon of permeate water produced.

AMPAC USA Sea Water Desalination Watermakers will feed raw water through a series of filters to remove solid impurities as well as to treat turbidity and other problems.

The RO Booster Pump will increase the pressure to force the feed water through the reverse osmosis membrane, resulting in delicious, salt free, purified water exceeding the World Health Organization Standards for Drinking Water Applications.

AMPAC USA Sea Water Desalination Watermakers combined with automated, precision fabrication result in the most consistent product performance available in the Sea Water Desalination today.