The Sterilight S8Q-PA provides point-of-entry disinfection with a flow rate of 10 gpm (38.6 lpm) at a 30 mJ/cm² dose (6 gpm (23.1 lpm) if a dose of 40 mJ/cm² is required.) This modular system, incorporating our new Silver™ controller, is ideal for whole home treatment of an entire home or cottage. Placed prior to the water heater, all the water in the home, including the hot water will receive disinfected water. The Silver™ controller provides constant output current and a universal power input (100-240V./50-60Hz.), as well as visually displaying remaining lamp life and total days of operation. All this is packaged in a new water-tight case and come fully CSA and CE compliant. Sterilume™-EX coated low pressure germicidal UV lamps are used to provide an economical way of treating water requiring a 99.99% reduction in bacteria and viruses.  

    The S8Q-PA is manufactured with a polished, 304 stainless steel, pressure rated tube and comes with unique combination ports with a 1" MNPT thread on the outside and a ¾ " FNPT thread on the inside. Quality is evident throughout the Silver platform ranging from quartz sleeves with fire-polished ends to seamless connections. Lamp change is easily accomplished without interrupting the water flow and the overmoulded connector can be removed without any additional tools. A drain port is included on the S12Q-PA to easily drain the reactor if required when changing out the UV lamp. Part # S810-RL